Redundant Source Manager

JFA Redundant Source Manager is an intelligent solution to allow Redundant UPS Rectifier Power operations using only one battery bank.

Can be used with non-JFA branded fonts.

It has two modes of operation, namely: 2 sources connected in parallel or 1 source connected and the other in redundancy.

It uses the SNMP and SMTP protocol and has a web interface for real-time monitoring and control of all functions and for configuring the equipment.

Redundant Source Manager lets you know if the rack has been opened by unauthorized people because they have the door open sensor.

  • Monitoring of SNMP and SMTP protocols;
  • Use of only one battery bank;
  • Can be used with non-JFA branded fonts.

Download

Main features

Technical information

  • Main Source Connections

    AC input (mains) ≤ 20 Amps; 48V input ≤ 40 Amps; Battery Charger Input ≤ 40 Amps

  • Redundant Source Connections

    AC input (mains) ≤ 20 Amps 48V input ≤ 40 Amps Battery charger input ≤ 40 Amps

  • Mode 1 of operation

    Main source on Redundant source off (switching time 5 seconds)

  • Mode 2 of operation

    Main source on Redundant source on (switching time 0 seconds)

  • Power network protection

    Surge Fuse

  • Manager

    10Mbps Base-t Speed RJ45 IEEE802.3TM Auto MDI/MDI-x: Not Supported MAC: Yes ARP/TCP/UDP/DNS/IP/ICMP/HTTP/SNMP Protocols Network Discovery: Over UDP

  • Dimensions

    1U - Rack 19"

  • Weight

    2,480 Kg